EDRC is an Emerging Trusted Resource Center with pounding Experience for Various facilities namely as “engineering diagnostic & research center” nicely abbreviated as edrc. The venture is established to provide quality testing service.
EDRC is ISO/IEC 17025:2015 Certified Company, this International Standard specifies and ensure the General Requirements for the Competence of Testing and Calibration Laboratories and the same International Standard is adopted by NABL for Accreditation, along with ISO/IEC 17025:2015 Certification, EDRC is also in process of acquiring the Accreditation in ISO/IEC 17025:2015 from NABL within couple of months.
EDRC is ISO 9001:2015 Certified Company also, to ensure the Quality of Process, Services & Customer Satisfaction all the time.
In order to widen up the Capability, Capacity & Scope of Services, EDRC has made Technological tie-ups and making EDRC as a large Resource Center by Associating with ‘Deep Testing Laboratories, Faridabad’, ‘OCE Projects Private Limited, Navi Mumbai’ and ‘Buildcon Material Testing & Services Private Limited, Pune’, hence EDRC takes up Tests to be Carried out under the Scope of NABL Accreditation, if at all required as per contractual requirements through OCE Projects Private Limited which is widely Experienced in all kind of Geological / Sub-surface Exploration and worked almost all over India, maintaining an NABL Accredited [in accordance with ISO/IEC-17025-2005] Material Testing Laboratory at 63, 64, 77, 78, GAUTAM COMPLEX, PLOT NO-17, SECTOR- 11, CBD – BELAPUR, NAVI MUMBAI – 400614 & BMTSPL [an NABL Accredited & ISO 9001 Certified Laboratory at Pune], BMTPL- Buildcon Material Testing & Services Private Limited, Pune’ & Deep Testing Laboratories, (A Division of Deep Heat Treatment Centre), Plot No. 338, Sector-58, Faridabad- 121004 (Haryana).
It’s my pleasure to introduce myself as Girish Chandra Bhatt, Director of EDRC, having diversified & wide Professional Experience for about more than 38 Years in Lab & Field Testing and worked in Large Sized Projects such as Aamby Valley Lonavla Maharashtra which involved the construction of Two Earthen & 1 Masonry Dam, Airport, Heliport, 7 Star Villas, Restaurants, Timber Chalets, Road / Water & Sewerage Network and almost all type of construction required for World Class City, I have worked as Head Quality Control for Construction of Male International Air Port Maldives Constructed by M/s GADL-GMR, where apart from Quality Control I was in key position for selection and approval of material from neighboring countries like Indonesia, Malaysia & Sri Lanka, Worked in M/s A. L. Technologies for NDT Tests at Singapore, Worked for M/s R. K. Chauhan Infrastructure Pvt. Ltd. To execute NHAI Projects at Chhattisgarh & Amrawati. I have Experience of establishing a Large Civil Engineering Material Testing Laboratory and successfully Operating for Nine Year at Vashi Mumbai for Structwell Designer & Consultants Pvt. Ltd. – R&D Centre, I have wide exposure of working with High-rise Construction in South Mumbai for M/s Sahana Group of Companies and working for quite a long time for Ferrous & Non-ferrous Industries like M/s B. R. Metal Industries Wadala Mumbai and M/s EMMES Metal Limited Kandiwali Mumbai.
With this huge and long earned Experience I can assure you to provide the Précised and Genuine Testing & Consulting Services as I find myself competent enough to lead the Laboratory in very Professional manner, broadly in the following Fields:
- Material Testing
WA & Specific Gravity, Surface Moisture, Total Moisture, Finer Than Passing 75 m / Silt Content (Vol.), DLBD (Dry Loose Bulk Density), Grading (Sieve Analysis), Deleterious Substances, Clay Lumps, Soft Fragment, Impact Value, Crushing Value, Abrasion Value, Flakiness Index, Elongation Index, Soundness Of Aggregate, 10% Fines Value
- Consistency, Setting Time, Compressive Strength, Fineness (By Blains Apparatus / By Dry Sieving), Specific Gravity
- Insoluble Residue, SO3 (Sulphur Tri Oxide), SiO2 (Silica), Al2O3 (Aluminum Oxide), Fe2O3 (Ferro± 95 %us Oxide), CaO (Calcium Oxide), MgO (Magnesium Oxide), Cl (Chloride), Na2O (Sodium Oxide), K2O (Potassium Oxide), LOI (Loss On Ignition)
o Bricks (Clay / Calcium Silicate), Concrete Bocks [Hollow / Solid], AAC Light Weight Concrete Blocks
WA, Bulk Density, Efflorescence, Compressive Strength, Density (Oven Dried)
o Concrete [Fresh / Hardened]
Concrete Mix Design (Fresh Mix Design) with testing of all material, Concrete Mix Design (Verification Of Mix by Accelerated Test) with testing of all material, Concrete Mix Design for Self Compacting Concrete, Compressive Strength (Cubical Samples), Concrete Cylinder Test, Beams (15 x 15 x 75 cms.), pH (Fresh & Hard), Chloride Content of Fresh & Hard concrete (Acid Soluble & Water Soluble), Sulphate, Alkalinity, Compressive Strength by Accelerated Curing Method
o Cement Concrete Terrazzo Tiles / Chequred Cement Tiles
Dimensions, WA, Flatness, Straightness, Perpendicularly, WTS, Total Thickness, Wearing Coat Thickness, Resistance to Wear
o Ceramic Tiles
WA, Dimensions, Flatness, Straightness, Perpendicularly, Total Thickness, Impact Test, Surface, Moisture Expansion Using Boiling Water (Unglazed Tiles)
o Wood / Timber:
Specific Gravity, Moisture Content Using Hot Air Oven Method, Static Bending Test, Compression Test (Perpendicular To Grain & Parallel To Grain each), Tension Test, Screw Holding Test, Nail Holding Test, Dry Density at 12 % Moisture Content
o Ply Wood
Resistance To Dry Heat, Glue Shear Strength, Adhesion Of Plies, Water Resistance Test, Moisture Absorption, Density & Adjusted Specific Gravity, Tensile Strength
o Flush Door (Hollow Core & Solid Core)
Glue Adhesion, End Emersion, Knife Test
Specific Gravity, Grain Size Analysis, Atterberg’s Limits (Liquid Limit, Plastic Limit & Shrinkage Limit), Unit Weight, NMC (Natural Moisture Content), Direct Shear Test, Unconfined Compression Test, Triaxial Compression Test, Compaction Test, Free Swell Index Of Soil, California Bearing Ratio Test (Soaked / Un-soaked), Field Compaction Test (Sand Replacement / Core Cutter), pH, Cl (Chloride), SO4 (Sulphate), Alkalinity, Conductivity
Compressive Strength, Porosity, WA & Specific Gravity, Density
o Bitumen & Bituminous Products
- Softening Point Test, Flash Point Test, Penetration Test, Marshal Stability Test, Specific Gravity, Bitumen Content (By Extraction Method), Ductility Test
- Density by Hydrometer, Viscosity by Saybolt Furol Viscometer @ 250C, Settlement in 5 Days in %age, Particle Charge, Water Content %age by Mass.
o Highway Material Tests / Design
Job Mix of BM, DBM, SDBC , DAC, BC, MSS, Mastic as per MORT& H / MORD & MS2, Job Mix of GSB, WMM.
o Pozzalanic Materials
Specific Gravity, Bulk Density, Lime Reactivity, Fineness (Blains Fineness)
o Reinforcement & Structural Steel
Tensile Test- 0.2% Proof Stress and Ultimate Tensile Stress, % Elongation, Bend Test / Re-bend Test, Unit Weight
o Paving Blocks
Dimensions, WA, C. S.
LOI (Loss On Ignition), CaO (Calcium Oxide), MgO (Magnesium Oxide), SiO2 (Silica), Al2O3 (Aluminum Oxide), Free Moisture
o Non-Destructive Tests On Concrete
Rebound Hammer Test, Load Test On Concrete Members, In-Situ Core Test on Concrete Member, Ultrasonic Pulse Velocity Test, Half-cell Potentiometer Test (Corrosion Test), Carbonation Test
o Road In-situ test
Benkelman Beam Test, Bump Indicator Test, Skid Resistance test, Traffic Census, Core extraction of bituminous surface
o Rock Bolts
Rock Bolt Pullout Test
Setting Time of Resin Capsules [by Gilmore Needle- as per ASTM]
o Water (Raw / Drinking, Construction, Pond), Effluent [Available for Construction Water other Proposed]:
Quantity of 0.02 N NaOH to Neutralize 100 ml water, Quantity of 0.02 N H2SO4 to Neutralize 100 ml water, pH Value, Organic Matter, In-organic Matter, Total Dissolved Solids, Total Suspended Solids, Total Alkalinity, Total Acidity, Calcium, Magnesium, Silica, Residual Chlorine, Chloride as ‘Cl’, Sulphate as ‘SO4’, Iron as ‘Fe’, Aluminum as ‘Al’, Conductivity, Sodium, Potassium, Nitrates as ‘NO3’, Nitrite as ‘NO2’, Oxygen Absorbed in 5 Days, Oxygen Absorbed in 4 Hours, Dissolved Oxygen, Free CO2, COD (Chem.. Oxygen Demand), BOD (3 Days at 27 deg. Cent.), Coliform Bacteria (MPN), E- Coli Per ml., Temperature, Colour, Odor, Lead, Manganese, Zinc, Nitrogen, Phosphate, Oil & Grease
- Research & Development
o Promotion of Industrial waste such as Fly Ash, Micro Silica, Blast Furnace Slag etc.
- Geological & Sub-surface Investigation / Exploration
o Boring in Soil & Drilling in Rock NX Size (76 mm), Conducting SPT, Collecting UDS, Collecting Water Sample, Providing Core Box, Conducting Trial Pit up to 2 m depth & collecting Samples. All sort of Sub-Surface Exploration.
o Customized Awareness on Concrete Production & Concrete Mix Design as per IS 10262 [Class Room & Demonstration]
o Implementation & Field Adjustments of Concrete Mixes
o Supervisor Level Awareness Program & On Site Training on Concrete mixes
o Training Program on Aggregate Testing (Lab & Field Tests) with Demonstration
o Training Program on Soil Testing (Lab & Field Tests) with Demonstration
o Training Program on Bitumen Test (Lab & Field Tests) with Demonstration
o Organizational Need Based Customized Training Programs